What is it uv resin?

Uv light curing resin is light green transparent liquid, without curing agent and accelerator surface coating, coated with exhaust billowing coating construction, into the UV lamp under uv light irradiation 3-6 minutes can be completely cured. After curing, it has high hardness, simple construction and economic benefits. The glue irradiated by ULTRAVIOLET light can be reused

How to apply the uv resin?

Suitable for crystal picture frame, paste board, polaroid board, furniture and other planar surface coating.BM type UV curing resin light yellow transparent liquid This product does not need to add curing agent and accelerator without direct coating or coating under high energy UV lamp curing. Suitable for crystal photo frame, album cover, polaroid board, furniture and other flat surface coating BM type piano baking resin light yellow transparent liquid this product is three components. Suitable for crystal photo frames. Kitchen cabinet door panel. Furniture coating. Note: UV light curing resin M type UV light curing resin (need light film to brighten) BM type UV light curing resin (do not need light film to brighten) 1.UV light using UV light after the resin can be quickly cured at low temperature, and can form bright and beautiful, plump film

Characteristic

(1) Safety and environmental protection. UV resin is a solvent-free resin, solid content of 100% by light after all into the film. After forming the film, it is plump and bright, and there is no harmful gas emission in the curing process, which helps to improve the operating environment and prevent air pollution.
(2) High production efficiency, basically not affected by cold season, fast curing at room temperature.
(3) Good film forming performance,UV glazing not only high gloss, smooth and has heat resistance, water resistance, scratch resistance and other properties.
(4). Due to the traditional curing mechanism of UV polishing is not the same, is not limited by the coating time, the coated objects without UV radiation will not be cured, there is enough time to exhaust bubbles, there is a good cleaning and maintenance, the resin can continue to use, reduce waste, save the cost of medicine.
(5). Brush coating can be used.
2. The basic principle of UV resin curing mechanism UV glazing is to use a certain band of UV light irradiation after triggered rapid curing reaction, so that the surface of the object to form a transparent gloss coating, play the role of beautification and decoration. Due to the light curing speed and light intensity is proportional to, so in order to improve the light intensity, make full use of light energy in addition to the selection of high energy UV lamp, but also must shorten the lamp and the work of the irradiation distance to the minimum, such as the use of low energy source, lamp distance from the best 6-8cm, the distance between the lamp the closer the better, the best root by. Such as the use of high energy high pressure lamp, the irradiation distance should be 25-35cm. High energy lamp will make the temperature rise, so that the curing speed is accelerated, in the operation should be comprehensive grasp. Light curing resin can not be mixed with other coatings.
(2). It is strictly prohibited to add diluent dilution, such as adding diluent will seriously affect the curing effect, fullness, hardness will not meet the requirements, and even can occur blistering pinhole
(3). When using BM type UV curing resin, it is best to use spraying method, the film should not be too thick, whether using self-leveling or other methods, should be ultraviolet lamp irradiation after the bubble exhaust. (4) When using BM type UV curing resin, the working environment should be clean and dust-free, because it is not coated to prevent the film surface from being polluted.
(5) When using BM type UV photosetting resin, it is best to use high-energy light source for better effect
(6). No matter what kind of light source is used, we should pay attention to the timely update of the lamp, light curing is inseparable from the light, the stronger the light energy, the better the curing effect, the service life of the lamp is limited, over the service life of the timely replacement, otherwise it will affect the curing speed and effect